|
|
D & R Consoles
SRC & Equipment Console - $140.00 USD - Order no. SRC 7
Call: (336) 451 - 0217 or (336) 451 - 5957
|
SRC7 7" Sloped equipment console accommodates up to 2 pieces of equipment.
Its compact size makes it popular for use in bench seat vehicles,
pick-up truck or undercover applications where limited space is available.
Compatible with the full line of console accessories including
cup holders, armrests and map lights.
Easy installation using standard floor mounting plates Equipment is quickly accessible for maintenance.
Fully airbag compatible.
Dimensions:
Face Length - 7.0"
Width - 8.25"
Equipment slots - 2
|
SRC 9 Equipment Console - $172.00 USD - Order no. SRC 9
Call: (336) 451 - 0217 or (336) 451 - 5957
|
SRC9SC The SRC9SC is a 9-inch console with a 40-degree down slope.
Designed to fit close to the dash of a car or SUV and ability to fit up to
3 pieces of equipment in a limited space area.
Due to sizing the design only remote mount equipment or very shallow
depth components are recommended.
|
SRC 11 Equipment Console - $185.00 USD - Order no. SRC 11
Call: (336) 451 - 0217 or (336) 451 - 5957
|
SRC11S 11" Sloped equipment console accommodates up to 3 pieces of equipment
providing a mid-size mounting solution. Designed for use in bench seat vehicles
or in between seats where limited space is available.
A Front to rear slope allows for taller equipment to be mounted to the front.
Compatible with the full line of console accessories including cup holders,
armrests and map lights. Easy installation using standard floor mounting plates.
Equipment is quickly accessible for maintenance. Fully airbag compatible.
Product Specifications:
Face Length - 10.5"
Width - 8.25"
Slope Angle - 5"
Equipment slots - 3
Available also for Vans, model - SRC11RV (console height increases by 4"/has no slope)
|
SRC 14 Equipment Console - $185.00 USD - Order no. SRC 14
Call: (336) 451 - 0217 or (336) 451 - 5957
|
SRC14R 14" Flat equipment console capable of holding up to 4 pieces of equipment.
A frequent choice by fleet operators since the flat design accommodates most equipment
with ease while providing good ergonomics for the vehicle operator and passenger.
Compatible with the full line of console accessories including cup holders, armrests and map lights.
Easy installation using standard floor mounting plates.
Equipment is quickly accessible for maintenance.
Fully airbag compatible.
Product Specifications:
Base Length - 17.5"
Face Length - 14.0"
Width - 8.25"
Depth - 8.0"
Equipment slots - 4
Available for Vans - model SRC14RV / height increases by 4"
|
SRC 18 Equipment Console - $205.00 USD - Order no. SRC 18
Call: (336) 451 - 0217 or (336) 451 - 5957
|
The SRC18R is an 18 inch console that provides a flat mounting
surface capable of holding 5 or 6 pieces of equipment.
|
SRC SUV Equipment Console - $250.00 USD - Order no. SRC SUV
Call: (336) 451 - 0217 or (336) 451 - 5957
|
SRCSUV 18" Sloped equipment console capable of holding up to 6 pieces of equipment.
Specifically designed to fit SUV's, vans or small trucks, the front to rear sloped
design allows taller equipment to be placed at the front while still providing a flat
mount area to the rear to accommodate cup holders or other accessories requiring a
flat mounting surface. The console design incorportates a side compartment providing
storage space for clipboards. Two smaller compartments provide additional storage.
Compatible with the full line of console accessories including cup holders, armrests and map lights.
Easy installation using standard floor mounting plates.
Equipment is quickly accessible for maintenance.
Fully airbag compatible.
Product Specifications:
Face Length - 18.0"
Width - 8.25"
Slope Angle - 5"
Equipment slots - 6
|
Crown Vic Console - $185.00 USD - Order no. SRC FCV
Call: (336) 451 - 0217 or (336) 451 - 5957
|
The SRCFCV is designed to fit a Crown Vic.
With a contour slop that mounts below the dash to allow easy access to your control center.
Available also for other make & model vehicles.
|
